GYTA-Outdoor Cable-Optical Cable-Product-AC-UNION | Global Fiber Opical Products Manufacturer

GYTA

The tubes are filled with fibers and a water-resistant filling compound. The strength member is a metallic strength member . An aluminum polyethylene laminate (APL) is applied around the cable core. Then the cable core is covered with a thin PE inner sheath, which is filled with jelly to protect it from water ingress. After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.

Features
Application
Structural parameters
Data Download

1.Material of loose tube with good temperature property and high Young's modulus,the tubes filled with moisture resistant gel for fibers to ensure the long term stability in transmission for two long wavelength windows

2.The central strength member are made by high Young's modulus steel wire

3.The loose tubes filles with moisture-proof and water blocking compound

4.Longitudinal corrugated steel tape laminated at both sides bonding to PE sheath ensures not only radial moisture-proof but also reinforces the crush resistance

5.HDPE jacket possesses good ultra violet radiation resistant property

1.Long distance and local area network(LAN) communication

2.Moisture-proof and rodent-proof

Fiber Count	Dimension (MM)	Weight (kg/km)	Tensile (N) LongTerm/Short Term		Crush(N/100mm) LongTerm/Short Term		Min.Bend Radius(mm) Dynamic / Static		Temperature (°C)
2-30	9.8	95	600	1500	300	1000	20D	10D	-40～+70
32-36	10.3	115	600	1500	300	1000	20D	10D	-40～+70
38-60	10.7	115	600	1500	300	1000	20D	10D	-40～+70
62-72	11.3	140	600	1500	300	1000	20D	10D	-40～+70
74-96	12.9	175	600	1500	300	1000	20D	10D	-40～+70
98-120	14.4	210	600	1500	300	1000	20D	10D	-40～+70
122-144	15.8	245	600	1500	300	1000	20D	10D	-40～+70
Note: All the values in the table, which are for reference only, are subject to change without notice.

Specification