Loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a PE sheath.
1.Accurate fiber excess length ensures good performance under mechanical stress
2.Material of loose tube with good temperature property and high Young's modulus, the tubes filled with moisture resistant gel for fibers to ensure the long term stability in transmission for two long wavelength windows
3.The central strength member are made by high Young's modulus steel wire
4.The loose tubes filles with moisture-proof and water blocking compound
5.Longitudinal corrugated steel tape laminated at both sides bonding to PE sheath ensures not only radial moisture-proof but also reinforces the crush resistance
6.HDPE jacket possesses good ultra violet radiation resistant property
1.Long distance and local area network(LAN) communication
Fiber Count |
Dimension (MM) |
Weight (kg/km) |
Tensile (N) LongTerm/Short Term |
Crush(N/100mm) LongTerm/Short Term |
Min.Bend Radius(mm) Dynamic / Static |
Temperature (°C) |
|||
2-12 |
10.5 |
125 |
600 |
1500 |
300 |
1000 |
20D |
10D |
-40~+70 |
14-24 |
12.0 |
145 |
1000 |
3000 |
1000 |
3000 |
20D |
10D |
-40~+70 |
26-36 |
12.0 |
150 |
1000 |
3000 |
1000 |
3000 |
20D |
10D |
-40~+70 |
38-48 |
15.0 |
205 |
1000 |
3000 |
1000 |
3000 |
20D |
10D |
-40~+70 |
Note: All the values in the table, which are for reference only, are subject to change without notice. |